Outros Cutting Mills

 
 

OUTROS GRUPOS DE PRODUTO

 
 

Universal Cutting Mill - variable speed 50-700 rpm

PULVERISETTE 19

Nº de encomenda
19.3040.00

Technical Data

Working principle cutting
Optimal for material type hard, tough-elastic, temperature-sensitive samples
Cutting tools rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives
Materials of the cutting tools hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01
Max. feed size (depending on the material and funnel) 70 x 80 mm
Max. throughput (depending on the material and sieve size) 60 l/h
Final fineness (depends on sieve cassette also available in further perforations) 0.1 - 20 mm
Feeding batchwise/continuous
Variable rotor speed 50-700 rpm
Rotor peripheral speed 0.26-3.66 m/s
Drive Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque
Electrical Details 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve cassette used) LpAd = 75 dB
Weight 77 kg
Dimensions (W x D x H) table mounted, on support frame or on table-top stand 44 x 79 x 56 cm

The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 50-700 rpm is also available in the following voltages and versions:

Order no. Electrical details / Torque
(three-phase motor with frequency converter and flywheel mass for stabilising the drive torque)
19.3040.00 for 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm
19.3000.00 for 200-240 V/1~, 50-60 Hz, 2350 watt, 26 Nm
19.3010.00 for 100-120 V/1~, 50-60 Hz, 1725 watt, 24 Nm

The PULVERISETTE 19  with voltage of “/3~”can only be operated on a three-phase supply network.
Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power.

The single-phase versions of the Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter.

Nº de encomenda
19.3040.00
Jessica Seifert
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Telefone +49 67 84 70 0

Banco de dados dos protocolos de moagem

Test now

MOAGEM DE TESTE GRATUITA

Envie-nos a sua amostra e nós efetuamos uma moagem de teste - Nós enviamos-lhe um protocolo personalizado de moagem.