Outros Cutting Mills
OUTROS GRUPOS DE PRODUTO
Mini Cutting Mill
PULVERISETTE 29
The Mini Cutting Mill PULVERISETTE 29 is equipped with 5 sample cups 100 ml.
Please note: In order to work with the Mini Cutting Mill PULVERISETTE 29 you require the following accessories:
- Funnel
- Cutting tool set
- Sieve insert
Optional
- Set of sample cups 100 ml = 100 sample cups
- Sample pusher spiral-finned for stable feeding without rebound
- Certification
FUNNEL
For the PULVERISETTE 29 select our funnel with pusher to easily feed your sample materials.
FUNNEL
funnel with sample pusher, inner diameter 27 mm
CUTTING TOOL SETS
-
Material data for cutting tool sets and application recommendation
Material and rotor type Main component of material Abrasion resistance Density g/cm³ Suitable for comminution of Hardened stainless steel Fe - Cr fairly good 7.7 Rotor with straight cutting edges and fixed knives
order no. 45.8307.00medium-hard, brittle samples, fibrous and biological materials, e.g. from the food, pharmaceutical and chemical industries; increased corrosion resistance; hardness 59 HRC Hardend tool steel Fe - Cr good 7.85 Rotor with straight cutting edges and fixed knives
order no. 45.8316.00medium-hard, abrasive samples, higher cutting and wear resistance; hardness 62 HRC
We offer cutting tool sets with rotors with straight cutting edges and fixed knives made of hardened stainless steel or hardened tool steel.
CUTTING TOOL SETS
The rotor made of hardened stainless steel with straight cutting edges which run parallel to the fixed knives is suitable for a variety of materials. The rotor knives may be turned, since they have 2 cutting edges. Your advantage: doubling the life span of your rotor knives.
| 1. Rotor knives | |
| General specifications | |
| Material | Stainless steel - 1.4112 |
| ISO/EN/DIN code | X90CrMoV18 / EN 10088 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 79 - 77 |
| Chromium – Cr | 17 - 19 |
| Silicon – Si | 1.0 |
| Manganese – Mn | 1.0 |
| Molybdenum – Mo | 0.9 - 1.3 |
| Carbon – C | 0.85 - 0.95 |
| Vanadium – V | 0.07 - 0.012 |
| Phosphorus – P | 0.04 |
| Sulphur – S | 0.015 |
| Physical and mechanical properties | |
| Density | 7.7 g/cm³ ; |
| Hardness | 56 - 58 HRC |
| 2. Rotor body | |
| General specifications | |
| Material of lid | Stainless steel – 1.4305 |
| ISO/EN/DIN code | X10CrNiS18-9 / X8CrNiS18-9 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 70.6 – 66.4 |
| Carbon – C | 0.10 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.15 – 0.35 |
| Chromium – Cr | 17 – 19 |
| Nickel – Ni | 8 – 10 |
| Copper – Cu | 1.00 |
| Nitrogen – N | 0.11 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | approx. 60 HRB |
Explanations on hardness data
The rotor made of hardened stainless steel with straight cutting edges which run parallel to the fixed knives is suitable for a variety of materials. The rotor knives may be turned, since they have 2 cutting edges. Your advantage: doubling the life span of your rotor knives.
| 1. Straight cutting edges | |
| General specifications | |
| Material | Tool steel – 1.2379 |
| ISO/EN/DIN code | X155CrVMo12/1 / 59350 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 85.79 – 82.14 |
| Carbon – C | 1.45 – 1.6 |
| Silicon – Si | 0.1 - 0.6 |
| Manganese – Mn | 0.2 – 0.6 |
| Phosphorus – P | 0.03 |
| Sulphur – S | 0.03 |
| Chromium – Cr | 11 – 13 |
| Molybdenum – Mo | 0.7 - 1 |
| Tungsten – W | 0.7 - 1 |
| Physical and mechanical properties | |
| Density | 7.85 g/cm³ ; |
| Hardness | 58-60 HV |
| 2. Fixed knives | |
| General specifications | |
| Material | Stainless steel – 1.4112 |
| ISO/EN/DIN code | X90CrMoV18 / EN 10088 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 79 - 77 |
| Chromium – Cr | 17 - 19 |
| Silicon – Si | 1.0 |
| Manganese – Mn | 1.0 |
| Molybdenum – Mo | 0.9 - 1.3 |
| Carbon – C | 0.85 - 0.95 |
| Vanadium – V | 0.07 - 0.012 |
| Phosphorus – P | 0.04 |
| Sulphur – S | 0.015 |
| Physical and mechanical properties | |
| Density | 7.7 g/cm³ ; |
| Hardness | 56 - 58 HRC |
| 3. Rotor body | |
| General specifications | |
| Material of lid | Stainless steel – 1.4305 |
| ISO/EN/DIN code | X10CrNiS18-9 / X8CrNiS18-9 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 70.6 – 66.4 |
| Carbon – C | 0.10 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.15 – 0.35 |
| Chromium – Cr | 17 – 19 |
| Nickel – Ni | 8 – 10 |
| Copper – Cu | 1.00 |
| Nitrogen – N | 0.11 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | approx. 60 HRB |
Explanations on hardness data
Sieve inserts made of stainless steel 316L
Sieve inserts determine the fineness of a sample. Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and materials of medium fineness with a narrow grain band.
Sieve inserts are also available in further perforations.
Sieve inserts MADE OF STAINLESS STEEL 316L
Sieve inserts determine the final fineness of a sample.
Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with trapezoidal and square perforations are offered. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving of medium fineness with a narrow grain band.
Sieve inserts determine the final fineness of a sample.
Sieve inserts with square and trapezoidal perforations are offered. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with square and trapezoidal perforations are offered. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band.Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with square and trapezoidal perforations are offered. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve inserts determine the final fineness of a sample.
Sieve inserts with square and trapezoidal perforations are offered. Sieve inserts with square perforations are used for the grinding of brittle materials and for achieving medium fineness with a narrow grain band. Sieve inserts with trapezoidal perforations improve size reduction through extra shearing action.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Accessories
The 100 ml sample cups are available separately for easy and hygienic sampling. A spiral-finned sample pusher is available for stable sample feeding without rebound.
ACCESSORY
Set of sample cups 100 ml = 100 sample cups
Sample pusher, spiral-shaped, for stable feeding without rebound enables good handling and an outstanding material feeding for a variety of materials.
CERTIFICATION
IQ/OQ documentation (questionnaire format - implementation not included) for the independent utilization for the support of instrument qualification in the quality management system for our Mini-Cutting Mill PULVERISETTE 29.
CERTIFICATION
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Mini Cutting Mill PULVERISETTE 29.
